Mc And Jon Enterprises

• 

  Mc & Jon Enterprises Engineering Works
  Drilling and mining supplies
  
  Business Philosophy
  
  -All efforts are directed towards customers satisfaction
  
  -On time deliver to customers
  
  -Competitiveness in terms of cost and quality of work for continuous growth and profitability
  
  -Constant advancement in technology
  
  -Customers are our business partners
  
  -Customers are the foundation of M&J’s existence success.
  
  -Customers satisfaction is the gauge of M&J’S success.
  
  
  STANDARD OPERATING PROCEDURE
  
  PRODUCT / EQUIPMENT
  
  METHOD MANUFACTURING
  
  CHEMICAL ANALYSIS also :
  
  Hardness
  
  Microstructure
  
  DESIGN / DRAWING
  
  BILL OF MATERIALS Purchasing
  
  
  Production planning and control planning
  
  
  MANUFACTURING Quality Control
  
  ASSEMBLY Quality Control
  
  TESTING Customer’s Approval
  
  DELIVERY
  
  STEPS IN MANUFACTURING
  
  
  1. Drawing
  
  2. Preparation of materials
  
  3. Planning / Scheduling
  
  4. Fabrication-quality control
  
  5. Assembly-quality control
  
  6. Testing
  
  
  Note:
  
  
  
  For critical parts like casting and forgings and others, quality control processes like X-ray, ultrasonic, tensile and compression test, hardness and chemical analysis are subcontracted to Metals Industry Research and Development Center (MIRDC).
  
  
  
  MACHINING
  
  
  
  
  1. The supervisor receives the drawing from the Production Planning and Control Group.
  
  
  
  2. Supervisor studies the drawing and discuss the process / method with the operator.
  
  
  
  3. Operator works on it. He is the responsible for the quality of his work. (For every critical parts,
  
  personnel from the QC Group are being called for assistance).
  
  
  
  4. After fabrication, parts requiring hardening or plating are being sent to our sub-contractor.
  
  
  
  · After processing, parts are being inspected thoroughly and are certified if they meet the requirements.
  
  
  
  5. Final Machining
  
  
  
  6. Quality Control
  
  
  
  7. Delivery
  
  
  
  
  WELDING
  
  
  1. Supervisor receives the drawing from the production, planning and control group
  
  
  
  2. Supervisor discusses drawings and method of welding with welders.
  
  
  
  3. Welders work on the difference welding machines (like in machining, he is also doing quality control
  
  of his work.
  
  
  
  4. Assembly
  
  
  
  5. Quality Control (visual and dimensions)
  
  
  
  6. Delivery
  
  
  
  
  
  
  
  · Other quality control process like X-ray, ultrasonic and others are being sub contracted to MIRDC
  
  
  
  POLICY ON QUALITY CONTROL
  
  
  
  This is to ensure the parts, components, sub-assemblies fabricated or supplied by clients for use in the production of their orders and that all incoming materials conform to the requirements of the company,
  
  
  
  MACHINE SHOP/CASTING
  
  
  
  1. Incoming / Receiving Inspection Report
  
  
  
  a. Ocular inspection of materials and supplies purchased to ensure that they meet the specifications set by the
  
  company as per customer requirements
  
  b. Check dimensions of materials. Tool being used: calipers, meters and other measuring tools.
  
  c. Check dimensions of the sample given by the customer.
  
  d. Check drawing with standard specifications and agreement with the customer.
  
  
  
  2. In-process Inspection
  
  
  
  A. Machine Shop
  
  
  
  a. After each operation and before proceeding to the next operation as indicated in the given route sheet given by the Production Control Group.
  
  
  
  For turning, milling, grinding, drilling and other operations measuring tools like vernier calipers, micrometers, bore gauges, 3-jaws micrometers are being used.
  
  
  
  b. Before and after the heat treatment process. For the softening procedures, we use the Brinell tester in getting the hardness and for hardening we use the Rockwell or Vickers hardness tester.
  
  
  
  B. Casting
  
  
  
  
  
  a. Checking patterns before sending them to our sub-contractor Tools being used: Caliper and meter
  
  
  
  b. After casting, x-ray or ultrasonic testing after passing ocular inspection, to ensure that all casting are sound.
  
  
  
  · This is being sent to testing center.
  
  
  
  c. Dimensional inspection of the casting before machining using calipers and meters.
  
  
  
  Note:
  
  
  
  For every critical part, chemical composition testing is also being requested from our sub-contractor.
  
  
  
  
  
  1. Rejections detected during production and their apparent causes shall be recorded in the inspector report form, a copy of which shall be immediately forwarded to production control for proper action.
  
  
  
  2. Decisions and other actions on rejections shall be recorded to provide bases in analyzing the causes and effects and avoid their recurrence.
  
  
  
  3. Final Inspection
  
  
  
  a. Final inspection shall recognize two broad categories of quality characteristics, attributes, and the variables. In inspection by attributes, the unit of the product shall be classified as defective or non-defective with respective to prescribed set of requirements.
  
  
  
  
  
  Inspection by variables, a quality characteristic shall be measured along a continuous numerical scale and shall be described in terms of position on that scale. Thus, variable inspection shall take into account the degree of conformance of the unit with the specified requirements for the characteristics involved.
  
  
  
  a. A final inspection report shall be prepared by the Quality Control inspector and shall contain the findings on the completed lot record in the completed inspection for attached to the report.
  
  
  
  2. All defective lots are labeled with metal marker detailing the nature of discrepancies.
  
  
  
  3. For finished/product/casting
  
  
  
  a. Visual inspection shall be conducted for cracks, pin hold shrinkage, excess metals and others.
  
  
  
  b. When required, dimensional inspection shall be conducted.
  
  
  
  4. All reports are being prepared by the quality control inspectors and submitted to the supervisor for evaluation of proper action.
  
  
  
  
  
  DETAILED LIST OF PRODUCT LINES
  
  
  
  These product lines are for soil test, mineral drilling, well drilling equipment parts and accessories.
  
  
  
  CORE BARRELS
  
  
  
  I. AQ3, BQ3, NQ3, PQ3 CORE BARREL ASSY. & HWT CORE BARREL ASSY. (for newly edition)
  
  
  
  1. Spearhead Point
  
  2. Compression Spring
  
  3. Detent Plunger
  
  4. Spearhead Base
  
  5. Latch Retracting Case
  
  6. Latch Spring
  
  7. Latch
  
  8. Upper Latch
  
  9. Lower Latch
  
  10. Spindle Assembly
  
  11. Shut off Value
  
  12. Valve Adjusting Washer
  
  13. Spindle Bearing
  
  14. Compression Spring
  
  15. Inner tube cap assembly
  
  16. Stop Ring
  
  17. Core Lifter
  
  18. Core Lifter Case
  
  19. Locking Coupling
  
  20. Locking Coupling
  
  21. Adopter Coupling
  
  22. Landing Ring
  
  23. Inner tube Stabilizer
  
  24. Thread Protector
  
  
  
  II. AQ,BQ,NQ,HQ,PQ, Over Shot Assembly
  
  
  
  1. cable Clamp
  
  2. Wire Rope Thimble
  
  3. Eye Bolt
  
  4. Swivel cable Collar
  
  5. Needle Thrust Bearing
  
  6. Hydraulic Grease Fitting
  
  7. Body
  
  8. Jar Tube Weldment
  
  9. Jar Staff
  
  10. Locking Sleeve
  
  11. Over Shot Head
  
  12. Compression Spring
  
  13. Lifting Dog
  
  
  
  LIFTING, LOWERING & HOLDING EQUIPMENT
  
  
  
  1. Sheave Wheels 14” to 24” diameter
  
  2. Tripod Clevis & Bolts
  
  3. Hoisting Plug Assembly
  
  Model: RW, EA, AN, & BNH
  
  4. Safety Foot Clamp Assembly, Hydraulic Type
  
  Model: Small, Medium & Large
  
  5. Casing Clamp ( short & long )
  
  6. Lowering Dog Assembly
  
  7. Holding Dog Assembly
  
  8. Jacking Beam Assembly
  
  Capacity: 100 tons
  
  
  FISHING TOOLS
  
  
  
  1. Casing & Rod recovery taps
  
  2. Casing & Rod Coupling recovers taps
  
  3. Bell Taps
  
  
  
  
  
  JAR WEIGHT
  
  1. Jar Hammer Assembly
  
  Capacity: 60 to 340 lb.
  
  
  
  WATER SWIVELS
  
  
  1. BOYLES BRAND
  
  a. WBE
  
  b. EAM
  
  c. BNM
  
  d. HME
  
  
  
  2. LONG YEAR BRAND
  
  a. Universal & Compact Swivel 25 K & 40 K
  
  
  Others:
  
  
  
  1. Fabrication of Inner Tube Wrench
  
  2. Sub-Adopters & Cross Over Adopters
  
  3. Fabrication of all kinds of Gears
  
  4. Supply parts of FMC 5354 Pump & FMC 520 pump
  
  5. Fabrication of all kinds of Drilling Equipment, Parts & Rehabilitation.
  
  6. Fabrication of Drill Mast Assembly, Long Year 34, 38 & 44
  
  7. Fabrication of Elevated Tank
  
  8. Rolling job 1 1/8 thick up to 3” thick mild steel plate
  
  9. Piping installation
  
  
  I. BUSINESS ADDRESS
  
  
  
  PLANT OFFICE: Block 19 Road 38 Planters Floodway
  
  Barangay San Andres Ploblacion
  
  Cainta Rizal
  
  Tel. No. (632)5719470
  
  (632)5842820
  
  
  
  
  
  
  
• Mission

  we support the drilling and mining industry needs ( products and services )
• Founded

  technolgy since 1972
• Awards

  
  
• Products

  We can repair and manufacture all sorts of steel !!!!!
  Corebarels, lifting lowering & holding equipment, fishing tools,

  
• Phone

  ( 632) 571 94 70 / 584 28 20/ 542 0123 / 542 0124 / 400 18 33/ +601163876747
• Email

  mcandjonenterprises@gmail.com, mcandjonenterprises@yahoo.com